Change TCP/IP settings - Enable DHCP, Etc. - Windows 10

Change TCP/IP settings - Enable DHCP, Etc. - Windows 10

To enable DHCP or change other TCP/IP settings (Windows 10)

  1. Select Start , then select Settings  > Network & Internet  > Wi-Fi .
  2. Select Manage known networks, choose the network you want to change the settings for, then select Properties.
  3. Under IP assignment, select Edit.
  4. Under Edit IP settings, select Automatic (DHCP) or Manual.
    • When you select Automatic (DHCP), the IP address settings and DNS server address setting are set automatically by your router or other access point (recommended).
    • When you select Manual, you can manually set your IP address settings and DNS server address.

    • Related Articles

    • Change TCP/IP settings - Enable DHCP, Etc. - Windows 8.1 or 7

      To enable DHCP or change other TCP/IP settings (Windows 8.1 or 7) Do one of the following: In Windows 8.1, select the Start button, start typing View network connections, and then select View network connections in the list. In Windows 7, ...

    • Grandstream Wifi AP - User Diagnostics - Power Cycle

      The lights on your Grandstream Wifi Access Point can tell a lot about what happening: SOLID BLUE - Unit is ready to use and should be working -  if the lights are solid blue but you can't connect to your Wifi See POWER CYCLING below SOLID GREEN - ...